Precor GEN06 Series C952 - Page 45

Tension and Tracking Adjustment" on page26 procedure.
16. Replace the belt guard cover ensuring the tabs are firmly locked into position on the
Take Up Roller shaft, see "End Cap & Belt Guard Cover Replacement" on page46.
17. Replace the end cap, see "End Cap & Belt Guard Cover Replacement" on page46.
18. Replace the hood cover.
19. Verify treadmill operation per "Operation Verification" and return to service.
.See Also
"Replacement Procedures" on page29
"Adjustment Procedures" on page20
(Undefined variable: TRM700-16Base.ServiceManualTitle)
39
5 Replacement Procedures
Drive Belt Replacement