Precor GEN06 Series C952 - Page 51

Tension and Tracking Adjustment" on page26 procedure.
17. Replace the belt guard cover ensuring the tabs are firmly locked into position on the
Take Up Roller shaft (see "End Cap & Belt Guard Cover Replacement" on the next
page).
18. Replace the end cap (see "End Cap & Belt Guard Cover Replacement" on the next
page).
19. Replace the hood cover.
20. Verify treadmill operation (see "Operation Verification" on page8) and return to service.
.See Also
"Replacement Procedures" on page29
"Adjustment Procedures" on page20
"Running Belt and Deck Replacement" on page61
(Undefined variable: TRM700-16Base.ServiceManualTitle)
45
5 Replacement Procedures
Drive Roller Replacement