Precor GEN06 Series C952 - Page 73

7. Tension the running belt to specification and verify tracking, see "Running Belt Tension
and Tracking Adjustment" on page26.
8. Replace the belt guard cover ensuring the tabs are firmly locked into position on the
Take Up Roller shaft, see "End Cap & Belt Guard Cover Replacement" on page46.
9. Replace the end cap (see "End Cap & Belt Guard Cover Replacement" on page46).
10. Replace the hood cover.
11. Verify treadmill operation (see Operation Verification) and return to service.
.See Also
"Replacement Procedures" on page29
"Running Belt Tension and Tracking Adjustment" on page26
"Running Belt and Deck Replacement" on page61
(Undefined variable: TRM700-16Base.ServiceManualTitle)
67
5 Replacement Procedures
Take Up Roller Replacement