38 Installing and Operating the Personal Viewing System (PVS) for Display C
6. Secure the locking tab and bracket using a hex head bolt.
Partially tighten. Repeat process to secure bracket on
opposite side.
Figure 39: Secure the bracket and locking tab
7. Fully tighten upper and lower fasteners. Torque each to
140 inch-pounds.
8. Using a flat head screw driver, bend the end on the
locking tab up against the head of the bolt. Repeat
process to secure locking tab on opposite side.
Figure 40: Position the locking tab against the bolt
Attaching the Entertainment Option
CAUTION: Do not try to access the tab found beneath the heart
rate electronics board.
To attach the entertainment option:
1. Separate the display console face from the console. Start
at the top and work toward the bottom, pressing the five
tabs to release it. This provides easier access to the 5-pin
connector.
Figure 41: Display console face separation
To Next Page
Loading...