Beginning the Assembly 39
2. Hold the integrated controller above the display console.
Feed the audio cable up through the opening in the top of
the display console and connect it to the integrated
controller. Let the end of the audio cable with the ferrite
clamp hang loose for now.
Note: Ferrite not required for PEP assembly.
CAUTION: It is critical that you attach the red wire on the
5-wire entertainment option cable to Pin 1. The word, PIN 1, is
inscribed on the back of the display console. An arrow points
to the location of Pin 1. The connector is keyed so it will only
connect one way. Do not force the connection.
Figure 42: Audio cable attachment
3. Connect the 5-wire entertainment option cable to the
display console.
Figure 43: Entertainment option cable connections
To Next Page
Loading...