40 Installing and Operating the Personal Viewing System (PVS) for Display C
4. Reattach the display console face by aligning the tabs and
applying pressure to the display face.
Important: Rest the integrated controller on top of the display
console while you realign the cables and install the transition
cover. The transition cover must be installed before you can
attach the integrated controller.
5. Attach the transition cover by inserting the base of the
cover first and then applying pressure to the upper
portion. It should snap easily into place.
Figure 44: Transition cover attachment
6. Install the integrated controller by aligning the two tabs
and applying pressure. Arrange the cables so you do not
inadvertently pinch or damage the cables.
Important: Cable damaged by improper installation will not
be covered by the Limited Warranty.
Figure 45: Integrated controller attachment
7. If you purchased the optional Personal Entertainment
Player (PEP) feature, attach the RCA cable to the RCA
video connector (has a yellow liner) on the back of the
integrated controller.
To Next Page
Loading...