Beginning the Assembly 41
Attaching the PVS to the Treadmill
To attach the PVS to the treadmill:
1. Place the screen face down on a clean work surface so
you have easy access to the back plate. Remove the screw
at the top of the PVS cover and set it aside.
Figure 46: Back plate screw location
2. Place your fingers at the base of the panel and pull up to
remove it. Set the back plate aside.
Figure 47: Back plate removal
3. Gather the cables together, including the RCA cable for
the optional PEP feature if purchased, and align the cables
along the neck of the integrated controller.
To Next Page
Loading...