Precor S3.25 User Manual

S3.25 Leg Press Option Assembly Instructions
page 8
1 2 3 4 5 6
2. Attach the Cross Brace to the
S3.25
Note: If you are assembling the Leg Press Option along
with the S3.25, you should complete Step 10 in the
S3.25 Assembly and Maintenance Guide before
attaching the Cross Brace.
A. Align the Cross Brace to the S3.25 Rear Upright
and secure it using
two 3-inch bolts
four washers
two locknuts
Wrench tighten.
A
2 - 3" bolts
4 - washers
2 - locknuts
Cross Brace
Step 2. Attach the Cross Brace to the S3.25

Precor S3.25 Specifications

Weight and Dimensions

length	60 inches (152 cm)
height	33 inches (84 cm)
width	30 inches (76 cm)
shipping weight	125 lb (57 kg)