© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 10
Power Input
Nominal 120V systems
Operating voltage range: 85 – 145 VAC
Frequency: 47 – 65 Hz
Nominal 230V systems
Rated operating voltage range: 180 – 264 VAC
Precor internal required operating voltage range: 180 – 275 VAC with reduced performance
allowed.
Frequency: 47 – 65 Hz
120 Vac Systems
120 VAC distribution systems utilize a single pole circuit breaker (hot lead) and a neutral lead
connected to a common neutral (ground) bar. The A.C. safety ground (green wire) is connected to
a separate ground bar in the distribution system.
If it is determined that any of the above electrical conditions are in question, please consult with a
qualified electrician to make appropriate circuit changes.
To Next Page
Loading...
Need help?
General