© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 98
Quarterly
Perform the following maintenance tasks every 3 months:
Verify the drive motor belt tension.
Verify the drive motor belt tension and adjust as
necessary, see "Drive Motor Belt Tension
Adjustment" procedure.
Vacuum the front compartment and motor
controller fan.
Remove hood and vacuum the compartment and
motor controller fan. It is recommended that you use
a static resistant vacuum cleaner. Be careful to not
put nozzle near PCA electronics.
Check the console metric and indicator
display and numeric keypad functionality.
Run the Display\Keypad diagnostic tests and check
the console metric/indicator LED/LCD displays and
numeric keypad functionality. On P80 series touch-
screen consoles, run the
Touchscreen/Backlight/RGB/Numeric
Backlight/Numeric Display diagnostic tests, refer to
Hardware Validation - Diagnostic Tests (51765761).
Record the current Odometer and Hours.
Access the Information Display or Equipment Usage
data and record the Odometer and Hours metrics,
see, Information Display (65).
Note: 1). Perform task with power removed and incline set to maximum level.
2) Diagnostic Test will vary depending on console model.
To Next Page
Loading...
Need help?
General