1. Launch Logic.
2.Go to Logic | Preferences | Audio.
3.Click on the Devices Tab.
4.On the Core Audio tab, check Enabled.
5.Select PreSonus Quantum 4848 from the device menu.
6.You will be asked if you’d like to relaunch Logic. Click try (re)launch.
7.Your Quantum 4848 features custom I/O labels for faster workflow. To
enable these labels for use in Logic, go to Options | Audio | I/O Labels.
8.The second column in the pop-up window will be named Provided by Driver.
Activate each of these labels for your Quantum 4848.
1.
启动
Logic
。
2.
进入
Logic |
首选项
|
音频。
3.
点击
"
设备
"
标签。
4.在Core Audio标签上，选中Enabled。
5.从设备菜单中选择 PreSonus Quantum 4848。
6.你会被问：是否要重新启动 Logic。点击尝试（重新）启动。
7.你的 Quantum 4848 具有自定义的I/O标签，以加快工作流程。要启用这些标签以便在
Logic中使用，请进入选项|音频|I/O标签。
8.在弹出的窗口中，第二栏将被命名为 "Provided by Driver"。为你的 Quantum 4848激活这
些标签。
1.
Launch Sonar.
2.
Go to Options | Audio...and click on the Advanced tab.
3.
Change theDriver Mode to “ASIO.” (Note: Using WDM, rather
than ASIO, for pro audio applications is not recommended.)
4.
Click the“OK”button.
5.
Restart Sonar.
6.
Go to Options | Audio...and click on the Drivers tab.
7.
Highlight all input and output drivers beginning with “PreSonus Quantum 4848”
8.
Go to Options | Audio... and click on the General tab.
9.
Set the Playback Timing Master to “PreSonus Quantum 4848... DAW Out 1.”
10.
Set the Recording Timing Master to “PreSonus Quantum 4848... Line 1.”
To Next Page
Loading...
