PRESONUS Quantum 4848 - Aggregating Devices 聚集设备; Macos 系统

23
5
5.1
Aggregating Devices
macOS
Quantum 4848
Owner’sManual
5.1 macOS 系统
5 Aggregating Devices 聚集设备
Up to four Quantum 4848 interfaces can be aggregated together for
combined 192 inputs and 192 outputs at 44.1 and 48 kHz . Quantum-series
interfaces are fully compatible with one another and PreSonus supports the
aggregation of any four Quantum-series interfaces together.
最多四个Quantum 4848接口可以聚合在一起，在44.1和48kHz下实现192
个输入和192个输出。Quantum系列接口彼此完全兼容，PreSonus 支持
将任何四个Quantum系列接口聚合在一起。
From UC Surface, you can easily locate every Quantum interface connected to your
computer by pressing the Identify button in the Device Tab. This will flash the power
button purple.
在
UC Surface
中，你可以通过按下设备标签中的识别按钮，轻松找到连接到
计算机上的每个
Quantum
接口。这将使电源按钮闪烁紫色。
1. Connect the Quantum-series interface you’d like to use as the master clock to
your computer first.
先把你想用作主时钟的 Quantum 系列接口连接到你的计算机上。
2. Launch Audio MIDI Setup.
启动音频MIDI设置。
3.
Select the Quantum model, and click on the plus sign in the lower left hand
corner. Select “Create Aggregate Device.”
选择 Quantum 型号，并点击左下角的加号。选择 "Create Aggregate Device"。
4. Check the Use box to the left of the master Quantum-series interface.
勾选主 Quantum 系列接口左边的使用框。