Quantum 4848
Owner’sManual
5.
C
onnect your other Quantum interfaces. Each unit will be require a Thunderbolt
cable to daisy-chain it to the previous unit as well as a BNC cable for clocking.
连接你的其他Quantum接口。每个设备都需要一条Thunderbolt电缆，以便
与前一个设备进行菊花链连接，同时还需要一条BNC电缆进行时钟连接。
6.
Designate one Quantum interface as the Master Clock and set the other units to
follow using BNC.
指定一个Quantum接口作为主时钟，并设置其他设备使用BNC来跟随。
Computer
Your Quantum system is now ready to use.
你的Quantum 系统现在可以使用了。
To Next Page
Loading...
