Aggregating Devices
Windows
Quantum 4848
Owner’sManual
选择你想作为第一组通道的Quantum接口，并将
优先级设置为 "1"。
3.
Select the Quantum interface you would like to use
for the next bank of channels. Set the priority to “2”
and the Clock Source to Wordclock.
选择你想用于下一组通道的
Quantum
接口。将优
先级设置为
"2"
，将时钟源设置为字时钟。
4.
If you are connected three or four Quantum
interfaces, you will repeat step 3 and set the
priority to 3 and 4 respectively.
如果你连接了三个或四个Quantum接口，你将重
复步骤3，并将优先级分别设置为3和 4。
Your Quantum system is now ready to use.
你的
Quantum
系统现在可以使用了。
To Next Page
Loading...
