EasyManua.ls Logo

Prestige APS787Z - Remote Start Service Mode; Engage Remote Start Service Mode

Prestige APS787Z
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
112020 Voxx Electronics Corporation. All rights reserved.
Turbo Timer (Optional)
This option will keep the engine running to allow the vehicle’s turbo to
properly cool down before shutting the engine o󰀨.
To engage the Turbo Timer feature:
1. With the vehicle running via the ignition key and your foot o󰀨 of the
brake pedal. Engage the vehicle’s parking brake.
2. The vehicle’s parking lights will turn on to verify the Turbo Timer
feature has been activated.
3. Turn the ignition key OFF, the vehicle will continue to run until the
pre-programmed time has elapsed (1, 3, or 5 minutes).
To disengage the turbo timer feature, press the vehicle’s brake pedal.
Remote Start Service Mode
For safety, the remote start feature can be disabled to prevent accidental
starting while the vehicle is being serviced.
To engage Remote Start Service Mode
1. Press and hold the valet override button.
2. Cycle the vehicle’s ignition ON/OFF three (3) times.
3. Release the valet override button.
The LED will begin to ash two (2) short ashes followed by one (1) long ash
to indicate Remote Start Service Mode is active. Repeat steps 1-3 above to
disengage Service Mode.

Other manuals for Prestige APS787Z

Related product manuals