Primera SureThing - Appearance Tab; Zooming in and out

16 CHAPTER 2
The SureThing Environment
Appearance Tab
The “Appearance” tab of the Program
Options dialog box lets you personalize the
look and feel of the SureThing interface.
Zooming In and Out
You can magnify or reduce your view of
the design area using a couple of different
methods. When you first open a file, or
when you create a new one, the zoom level
is set to fit within the current window. This
means that the view size of the label is
dependent upon the size of the window;
increasing or decreasing the SureThing
window zooms in or out of the label.
You can also set the view size to a specific
zoom percentage, such as 50% to view it at
half the actual size, or 300% to view it at
three times the actual size, for example.
When you choose a specific zoom level,
the size of the current window does not
affect the view size of the label.
To zoom in:
Do one of the following:
• Click the Zoom In button on the
Control Strip. Each time you click it
increases the zoom level.
• Press Ctrl+Plus key (numeric keypad)
• Choose Custom Zoom from the Zoom
sub-menu under the View menu and select
a zoom level from the list, or enter your
own zoom level (must be between 30%
and 400%).
To zoom out:
• Click the Zoom Out button on the
Control Strip. Each time you click it
decreases the zoom level.
• Press Ctrl+Minus key (on the numeric
keypad)
• Choose Custom Zoom from the Zoom
sub-menu under the View menu and select
a zoom level from the list, or enter your
own zoom level (must be between 30%
and 400%).
You can return the zoom level to the actual
print size or to the size of the current
window by choosing Actual Size or Zoom to
fit in Window from the Zoom sub-menu
under the View menu. Clicking the
button on the Control Strip does the same
thing.