To Next PageTo Next Page
Need help?Do you have a question about the PRIMERGY TX200 S3 and is the answer not in the manual?
General| Form Factor | Tower |
|---|---|
| Number of Processors | 1 or 2 |
| RAID Support | RAID 0, 1, 5, 10 |
| Network Interface | 2 x Gigabit Ethernet |
| Operating System Support | Windows Server, Linux |
| Processor | Intel Xeon processors |
| Memory | Up to 32GB DDR2 |
| Expansion Slots | PCI, PCI-X, PCI Express |
Details the features of the PRIMERGY TX200 S3 server.
Describes ServerStart and high reliability tools provided with the server.
Explains the names and functions of server components.
Explains standard operations like turning the server on/off and media handling.
Outlines the workflow from server installation to operation.
Covers installing internal options and performing hardware settings.
Guides the choice of OS installation methods.
Lists important notes and precautions for OS installation.
Details preparation steps for using ServerStart on a client PC.
Explains the wizard-based OS installation process.
Explains setting and saving installation info in a configuration file.
Covers using Disk Manager for formatting and OS installation.
Explains ServerStart's support for remote OS installation.
Explains performing installations on multiple servers using ServerStart.
Explains how to create necessary driver installation disks.
Provides procedures for manually installing the OS.
Explains how to install LAN drivers, especially after OS installation.
Configures settings for obtaining memory dumps and paging files.
Guides the creation of a system recovery disk after manual OS installation.
Explains how to store BIOS setup and system configuration information.
Guides the creation of tools like hardware configuration and DOS floppy disks.
Important notes and settings before starting server operations.
Details advanced setup for LAN drivers using Intel® PROSet.
Explains RAID management tool for array configuration and monitoring.
Describes ServerView for monitoring server hardware status and errors.
Explains DSNAP for acquiring failure investigation information.
Lists types of hardware options and checks before installation.
Procedures for removing and attaching server covers.
Guides the installation of CPU modules.
Guides the installation of additional memory modules.
Guides the installation of expansion cards.
Guides the installation of internal hard disk units.
Guides the installation of 5-inch internal devices.
Guides the installation of an optional parallel port.
Explains how to connect external SCSI devices.
Details the server's switch block settings and their functions.
Guides how to make settings using the BIOS Setup Utility.
Covers checking server status and performing daily maintenance.
Provides resolutions for server operational issues and error messages.
Explains how to use Server Management Tools for system event logs.
Covers hardware and BIOS security features.
Recommends periodic backups for data restoration.
Guides system restoration using recovery disks.
Explains the procedure for reinstalling the operating system.
Details the server's maintenance service and support period.
Provides detailed specifications for the server hardware.
Lists specifications for installable internal hardware options.
Explains how to use the server management port for remote control.
Explains functions and features of the Remote Management Controller.
Information on how to properly recycle the server and its components.
