Pro-face GP3000 Series User Manual

10
Package Contents
The following items are included in the GP unit’s package. Before using the GP, please check that all items
listed here are present.
This unit has been carefully packed, with special attention to quality. However, should you find anything dam-
aged or missing, please contact your local GP distributor immediately.
GP Unit: 1
• English and Japa-
nese Installation
Guides (1 of each)
• Warning/Caution
Information (1)
Installation Gasket: 1
Installation Fasteners:
4 per set
(Attached to the GP
unit)
(GP-3700 series only:
4 x 2 sets)
DC Power Connector: 1
• GP-3200/3300/3400 series
(Attached to the GP unit for
GP-3200/3300 series)
• GP-3500/3600/3700 series
(DC model only)
(Attached to the GP unit)
USB Cable Clamp 1 set
• GP-3300 series
<All GP-3300 series, except AGP-3310T/3360T>
Holder: 1, Clamp: 1
<AGP-3310T/3360T only>
Clip: 2, Tie: 2
• GP3000 series except GP-3300 series
Holder: 1, Cover: 2
(GP-3200 series only: Holder: 1, Cover: 1)
AUX Connector: 1 RCA-BNC Convertor: 1
• GP3000 series except
GP-3200/3300 series
(Attached to the GP unit for
GP-3500/3600/3700 series)
• GP-3*50 series/AGP-
3360T/3560T only
DIO Connector 1, Installation Guide 1
FLEX NETWORK Connector 1, Installation Guide 1
• DIO board type only • FLEX NETWORK board
type only

Pro-face GP3000 Series Specifications

General

Touch Panel Type	Analog Resistive
Power Supply	24V DC
Display Type	TFT LCD (depending on model)
Communication Ports	RS-232, RS-422/485, Ethernet
Operating Temperature	0°C to 50°C
Backlight	LED
Protection Rating	IP65 (front panel)
Storage Temperature	-20°C to 60°C
Display Size	5.7 to 12.1 inches (depending on model)
Resolution	320x240, 640x480, 800x600