Chapter 2 Accessories
2-5
2.1.5 Maintenance Items
Product Name Model No. Corresponding GP Description
Installation Fastener CA3-ATFALL-01 GP3000 Series
Used to install the GP into a
solid panel.
Installation Gasket
ST400-WP01 GP-3200 Series
Provides dust and moisture
resistance when GP is installed
into a solid panel.
CA3-WPG6-01 GP-3300 Series
CA5-WPG8-01 GP-3400 Series
CA5-WPG10-01 AGP-35*0T
CA3-WPG12-01
AGP-3500L
AGP-3500S
GP-3600 Series
CA3-WPG15-01 GP-3700 Series
Replacement
Backlight
CA5-BLU10T-01
AGP-35*0T
*1
*1 The corresponding backlight unit depends on your GP’s revision. For details, please refer
to “9.4.1 AGP-35*0T (page9-6)”.
This backlight is used for
replacement.
CA6-BLU10T-02
PS501S-BU00 AGP-3500S
CA3-BLU12-01
AGP-3600T
AGP-3650T
CA3-BLU15-01 GP-3700 Series
Connector Cover CA3-BUSCVR-01
GP3000 Series
(except GP-3200
series)
Protects the AGP unit’s rear
face connector.
AUX Connector
CA5-AUXCNALL-01
GP-3400 Series
GP-3500 Series
GP-3600 Series
GP-3700 Series
AUX connector for GP3000
series required in case an
external output is used.
USB Cable Clamp
(1 port)
CA5-USBATM-01
GP-3300 Series
(except AGP-3310T/
3360T)
USB Cable clamp for 1 port
products to prevent
disconnection.
CA8-USBATALL-01
AGP-3310T
AGP-3360T
USB Cable Clamp
(2 ports)
CA5-USBATL-01
GP-3200 Series
GP-3400 Series
GP-3500 Series
GP-3600 Series
GP-3700 Series
USB Cable clamp for 2 port
products to prevent
disconnection.
DC Power Supply
Connector for
Medium-sized Units
CA5-DCCNM-01
GP-3200 Series
GP-3300 Series
GP-3400 Series
Connector for attaching power
supply to medium-sized units.
DC Power Supply
Connector for Large-
sized Units
CA5-DCCNL-01
GP-3500 Series
GP-3600 Series
GP-3700 Series
Connector for attaching power
supply to large-sized units.
Panel Cutout Adapter
CA4-ATM5-01 GP-3300 Series
Panel cutout adapter for
mounting GP-3300 series in
cutout of GP-37W2B.
CA4-ATM10-01 AGP-35*0T
Panel cutout dapper for
mounting GP-3500 series (TFT
color LCD type only) in cutout of
GP-2500/2600 series.
To Next Page