3310F Series Operation Manual 7
1-2. Features
The main features of the 3310F series of load modules are highlighted below.
• Bench top and rack mounting flexibility with single, dual and 4 slot mainframes
• CC, CR, CV, CP, Dynamic, and Short Operating Mode.
• Remote control via a choice of computer interfaces.
• High accuracy & resolution with 16 bit voltage and current meter.
• Built in pulse generators for dynamic loading.
• Independently adjustable current rise and fall times.
• Short circuit test with current measurement
• Dedicated over current and overpower protection test functions
• Programmable voltage sense capability.
• Full protection from overpower, over-temperature, overvoltage, and reverse polarity.
• Analogue programming input for tracking an external signal
• Current Monitor with BNC (non-isolated) socket.
• Digital Calibration
• Advance Fan speed control
• Ability to save load set-ups via the mainframe memory (150 store/recall locations)
• Auto sequence function allowing test routines to be set from the mainframe
1-3. Standard Accessories
a 4mm Banana Plug (Red) 1 PC
b 4mm Banana Plug (Black) 1 PC
c 2mm Banana Plug (Red) 1 PC
d 2mm Banana Plug (Black) 1 PC
e Hook Terminal Y type Large size terminal 4 PCS
f Hook Terminal Y type small size terminal 2 PCS
g 3310F series operation manual 1 PC
To Next Page