WARNING!
Warning of hazardous or unknown feed chemical
Should a hazardous or unknown feed chemical be
used, it may escape from the hydraulic components
when working on the pump
.
– Take appropriate protective measures before
working on the pump (protective eyewear, protective
gloves, ...). Read the safety data sheet on the feed
chemical.
– Drain and flush the liquid end before working on the
pump.
CAUTION!
Warning of feed chemical spraying around
Feed chemical can spray out of the hydraulic compo‐
nents if they are manipulated or opened due to pressure
in the liquid end and adjacent parts of the system.
– Depressurise the system prior to undertaking any
maintenance or repair work!
CAUTION!
Warning of feed chemical spraying around
An unsuitable feed chemical can damage the parts of
the pump contacted by the chemical
.
– Take into account the resistance of the material
contacted by the chemical when selecting the feed
chemical - refer to the ProMinent
®
resistance list in
the product catalogue or at
www.prominent.com
.
CAUTION!
Danger of personal and material damage
The use of untested third party parts can result in
damage to personnel and material damage
.
– Only fit parts to dosing pumps, which have been
tested and recommended by ProMinent.
CAUTION!
Danger
from incorrectly operated or inadequately main‐
tained pumps
Danger can arise from a poorly accessible pump due to
incorrect operation and poor maintenance.
– Ensure that the pump is accessible at all times.
NOTICE!
Danger from incorrect dosing
Should a different liquid end size be fitted
, this will
change the dosing behaviour of the pump.
– Have the pump reprogrammed in the works.
Safety information
Safety Chapter
11
To Next Page
