ProMinent Beta BT4b - Page 40

Type Minimum flow rate
at maximum counter pres‐
sure
Minimum flow rate
at
medium counter pressure
Connec
tor size
äÆ x iÆ
Suction
lift*
Priming
lift**
Maximu
m
priming
pres‐
sure on
suction
side
bar l/h ml/
stroke
bar l/h ml/
stroke
mm m WS m WS bar
1001 10 0.72 0.067 5.0 0.60 0.08 6x4 6.0 2.0 0.5
0701 7 0.84 0.078 3.5 1.12 0.10 6x4 6.0 2.0 0.5
0401 4 0.9 0.083 2.0 1.2 0.11 6x4 6.0 2.0 0.5
2002 20 0.78 0.07 10.0 1.8 0.17 6x4 6.0 2.5 0.5
1602 16 1.40 0.13 8.0 1.74 0.174 6x4 6.0 2.5 0.5
1002 10 1.7 0.16 5.0 2.0 0.18 6x4 6.0 2.5 0.5
0702 7 1.8 0.17 3.5 2.2 0.20 6x4 6.0 2.5 0.5
0402 4 2.1 0.19 2.0 2.5 0.23 6x4 6.0 2.5 0.5
1604 16 2.7 0.25 8.0 3.6 0.33 6x4 6.0 3.0 0.5
1004 10 3.3 0.30 5.0 3.9 0.36 6x4 6.0 3.0 0.5
0704 7 3.6 0.33 3.5 4.0 0.37 6x4 6.0 3.0 0.5
0404 4 3.9 0.36 2.0 4.2 0.39 6x4 6.0 3.0 0.5
0708 7 6.60 0.61 3.5 7.50 0.69 8x5 4.0 2.0 0.5
0408 4 7.5 0.64 2.0 8.1 0.77 8x5 4.0 2.0 0.5
0413 4 10.8 1.0 2.0 12.6 1.17 8x5 3.0 2.5 0.5
0220 2 16.2 1.5 1.0 18.0 1.67 12x9 2.0 2.0 0.5
1008 10 6.3 0.58 5.0 7.5 0.69 8x5 3.0 3.0 0.5
0713 7 10.5 0.97 3.5 12.3 1.14 8x5 2.5 2.5 0.5
0420 4 15.6 1.44 2.0 17.4 1.61 12x9 2.5 2.5 0.5
* - Suction lift with a filled suction line and filled liquid end. With
self-bleeding dosing head with air in the suction line
.
** - Priming lift with clean and moist valves. Priming lift at 100 %
stroke length and free flow or opened bleed valve.
*** - The given performance data constitutes guaranteed minimum
values, calculated using medium water at room temperature.
The bypass connection with a self-bleeding dosing head is
6x4 mm.
1
- The connector width is 6 mm on SST material versions.
Beta
®
dosing pumps for higher
-viscosity media (HV) have a
10-20 % lower capacity and are not self-priming. Connector
G 3/4-DN 10 with tube nozzle d16-DN10.
Technical Data
40