ProMinent DULCOMARIN II - Page 11

4. Using the arrow keys enter your password and then press
the
[ENTER] key
ð
The configuration menu for your A module is now dis‐
played.
5. Select the desired parameters to be changed using the arrow
keys and then press the
[ENTER] key
ð
The adjustment display for the parameter to be set
appears.
6. Using the vertical arrow keys enter the corresponding value
and then press the
[ENTER] key
ð
The configuration menu for your A module is now dis‐
played.
7. Now press the
[F5] key [BACK-UP] and answer the following
query by pressing the [ENTER] key
ð
A controller writes the values of the changed parameters
into its control.
8. Now press the
[ENTER] key
ð
The configuration menu for your A module is now dis‐
played.
9. Repeat this process for all parameters that are to be
changed.
Flow control [water flow]
11