ProMinent DULCOMETER D1CA - Technical Data

33
Temperature specifications D1C D Control panel Wall mounting
Permissible ambient temperature installation
Basic version: 0 °C...50 °C -5 °C...45 °C
Expansion version: with position feedback
or with correction value via mA
or with disturbance variable via mA 0 °C...45 °C -5 °C...40 °C
D1C W
Permissible ambient temperature
Basic version: -5 °C...50 °C
Expansion version: with position feedback
or with correction value via mA
or with d isturbance variable via mA -5 °C...40 °C
Permissible storage temperature: -10 °C...70 °C
Material specifications / chemical resistance
Part Material
Housing and frame D1C D PPO GF 10
Housing D1C W PPE GF 10
Rear panel D1C D PPE GF 20
Membrane keypad Polyester film PET
Seal Cellular rubber CR
Inner seal, D1C D Silicon-based sealing compound
Retaining bracket and screws Galvanised, zinc-plated steel
M5 screws A2
Chemical resistance:
The device is resistant to normal atmospheres in installation rooms.
Dimensions and weights
D1C D
96 x 96 mm in accordance with DIN 43700, depth 140 mm
Device weight without packing: approx. 850 g
Gross weight of device with packing: approx. 1200 g
D1C W
198 x 200 x 76 mm (W x H x D) Wall mounting
198 x 200 x 35 mm (W x H x D) Control panel installation, external
198 x 200 x 38 mm (W x H x D) Control panel installation, internal
Device weight without packing: approx. 1.2 kg
Net weight of device with packing: approx. 2.0 kg
Electrical data
Probe input via terminals
(X2.12 ... X2.9): Input resistance: > 5 x 10
11
Ω
Input resistance of reference electrode with respect to
chassis ground: <1 kΩ
Input range: ±1 V
Accuracy: ±0.5 % of input range
Resolution: 0.0625 % of input range
Connection option for one equipotential bonding electrode
(alternatively, two connection terminals are to be connected
by a wire jumper).
6 Technical Data