EasyManua.ls Logo

ProMinent DULCOMETER D1CA - Device Identification and Identity Code

ProMinent DULCOMETER D1CA
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
2 Device Identification / Identity Code
D1C A
Please enter the identity code of your device here.
D1C DULCOMETER
®
Controller Series D1C
W Wall mounting
D Control panel installation, 96 x 96 mm
Operating voltage
0 230 V 50/60 Hz
1 115 V 50/60 Hz
2 200 V 50/60 Hz (control panel installation only)
3 100 V 50/60 Hz (control panel installation only)
4 24 V AC/DC
Measured variable
B Bromine (0.1...13 mg/l) (3rd quarter 2001)
C Chlorine (0...0.5/2/10/20 mg/l)
L Conductivity (0…20/200/2000 µS/cm; 0…20/200 mS/cm)
P pH (0...14 pH)
R Redox (-1000...1000 mV)
H Hydrogen peroxide (1…20; 10…200; 100…2000 mg/l)
S Standard signal (0/4-20 mA)
A Peracetic acid (10…200; 100…2000 mg/l)
D Chlorine dioxide (0...0.5/2/10/20 mg/l)
Z Ozone (0...2 mg/l)
X Dissolved Oxygen (0.1...10/20 ppm)
T Temperature (0...100 °C)
Connection of measured variable
1 Terminal, standard signal 0/4-20 mA (signal converters necessary for controllers
with measured variable connection, standard signal 0/4-20 mA
2 SN6 connector for P or R
3 Terminal for L
4 Terminal PT 100 for T
5 Terminal mV for P or R
Correction variable
0 None
1 pH for chlorine
2 Temperature for P, D, H, A or L via terminal
3 Temperature for P, D, H, A or L via standard signal 0/4-20 mA
4 manual temperature entry for P, H, A or L
Feedforward control
0 None
1 Flow as standard signal 0/4-20 mA
2 Flow as frequency 0 - 500 Hz
3 Flow as frequency 0 - 10 Hz
Control input
0 None
1 Pause
Signal output
0 None
1 Standard signal 0/4-20 mA measured value
2 Standard signal 0/4-20 mA controlled variable
3 Standard signal 0/4-20 mA correction variable
42 standard signal outputs 0/4-20 mA, freely programmable (not for H, A)
Power control
G Alarm and 2 limit value relays
M Alarm and 2 solenoid valve relays (pulse length control)
R Alarm relay and actuator with feedback
Pump control
0 None
2 Two pumps
Control characteristic
0 None
1 Proportional control
2 PID control
Log output
0 None
Language
D German (E, F, N)
E English (D, F, N)
F French (D, E, N)
I Italian (D, F, S)
N Dutch (D, E, F)
S Spanish (D, I, F)
P Polish (D, E, A)
A Swedish (D, E, P)
B Portuguese (E, S, F)
U Hungarian (P, A, E)
G Czech

Related product manuals