Need help?Do you have a question about the Proxim Tsunami QuickBridge.11-R Series and is the answer not in the manual?
General| Frequency Band | 5 GHz |
|---|---|
| Maximum Throughput | 54 Mbps |
| Data Rate | 54 Mbps |
| Modulation | OFDM |
| Security | WEP, WPA, WPA2 |
| Channel Bandwidth | 20 MHz |
| Product Type | Wireless Bridge |
| Antenna Gain | 23 dBi |
| Ethernet Ports | 1 x 10/100 Mbps |
| Wireless Standard | 802.11a |
| Interface | Ethernet |
Highlights the main functionalities and benefits of the QuickBridge.11 system.
Factors to consider before installing the QuickBridge.11 system, including RSL, path availability, and mounting.
Guidelines for selecting an optimal location for the hardware, considering range and environmental factors.
Lists essential tools needed for installing the QuickBridge.11 units.
Instructions for unpacking the unit and accessories and noting important identifiers like serial numbers.
Guidance on orienting the unit for vertical or horizontal polarization based on the indicator arrow.
Detailed instructions for assembling the mounting plate, extension arm, and bracket for unit installation.
Procedure to verify equipment operation and test the wireless link before final installation.
Instructions for pole-mounting and wall-mounting the unit using the provided brackets.
Steps for connecting the CAT5 cable to the unit, power injector, and PC for network connection.
Information on powering the unit via Power-over-Ethernet (PoE) and how the unit indicates power status.
Explanation of the LED indicators on the Ethernet port and their meaning for unit status.
Process for physically aligning the antenna for optimal radio link quality using audible and numerical feedback.
Instructions for tightening the sealing cap/lock nut assembly for weatherproof connections, with torque specifications.
Procedure using self-fusing tape and electrical tape to seal and protect external connectors from the environment.
Steps for installing the included documentation and software from the CD-ROM onto a computer or network.
Using ScanTool to discover or assign an IP address to the unit for network management.
Steps to access and log into the unit's web-based management interface.
Methods for connecting to the unit via Ethernet or serial port using a command-line interface.
Configuring system name, location, and country to set allowed frequencies and bandwidth.
Explanation of DFS for 5 GHz band compliance with radar systems and regulatory requirements.
Manual adjustment of output power to reduce interference or optimize link quality.
Setting IP parameters like address, subnet mask, and routing options for network connectivity.
Configuring Ethernet and Wireless interfaces, including network name and security settings.
Implementing VLANs for network segmentation and assigning resources to logical groups.
Changing security settings, including encryption keys and user passwords, for device protection.
Information on obtaining support through Proxim's eService website and telephone numbers.
To Next Page