Page 4 Copyright © 2007 Proxim Wireless
INTRODUCTION
The Tsunami QuickBridge.11 is a wireless point-to-point networking solution for
any enterprise or small business. Two pre-congured bridges enable users to
easily, quickly, and economically install a wireless LAN extension between two
locations, eliminating the need for costly leased line or cable alternatives. The
QuickBridge.11 kit contains everything you need to establish a point-to-point
connection, including one Base Station Unit (BSU), one Subscriber Unit (SU),
power injectors, antennas, and Ethernet cables.
The product’s principle components are a unit and a power-and-Ethernet
injector. The unit has a self-contained antenna enclosed in a weatherproof
container, which can be mounted to the side of a building, on a pole, or on a
tower structure.
The following products are covered in this guide:
Model 2454-R: Wireless outdoor Base Station and/or subscriber unit
operating in the 2.4 GHz band.
Model 4954-R: Wireless outdoor Base Station and/or subscriber unit
operating in the 4.9 GHz Public Safety band.
Model 5054-R: Wireless outdoor Base Station and/or subscriber unit
operating in the 5 GHz band.
Model 5054-R-LR: Wireless outdoor long-range Base Station and/or
subscriber unit operating in the 5 GHz band.
KEY FEATURES
Some of the key features of the QuickBridge.11 include:
The use of a highly optimized protocol for outdoor applications
Asymmetric bandwidth management
Management through a Web Interface, a Command Line Interface (CLI), or
Simple Network Management Protocol (SNMP)
Software and conguration upgrade through le transfer (TFTP)
Outdoor placement for signicantly improved range and ease of installation
Integrated antenna
VLAN Support
This document shows the basics of setting up the units. For detailed
information, see the Installation and Management manual.
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪