Prusa Research MINI+ - Spool Holder Assembly

Building your MINI+
22 Original Prusa MINI+ semi-assembled
STEP 32 Spool holder parts preparation
For the next steps, please prepare:
MINI base spool holder (4x)
MINI rail spool holder (2x)
M3x12 screw (4x)
M3x8 screw (4x)
M3n nut (4x)
Bearing 608b (4x)
The list continues in the next step...
STEP 33 Spool holder parts preparation
For the following steps, please
prepare:
Anti-vibration pad (4x)