Building your MINI+
8 Original Prusa MINI+ semi-assembled
STEP 5 We are here for you!
Lost in the instructions, missing a screw or dealing with a damaged printed part?
Let us know!
You can contact us using the following channels:
In the online version, use comments under each step.
Use our 24/7 live chat at shop.prusa3d.com
Write an email to info@prusa3d.com
STEP 6 XYZ-axes parts preparation
For the following steps, please prepare:
XZ-axis assembly
M3x40 screw (1x)
M3x20 screw (1x)
M3x12 screw (1x)
Note the second M3x20 screw in the package, will be used later on.
The list continues in the next step...
To Next Page
Loading...
