PSI FluorPen FP 110 Instruction Guide

Page | 43
Online Control – Protocols (Fig. 25)
Selection of the protocol for single measurements may be done under this tab in the software. Once the measurement is completed the
data is saved to the device and can be downloaded to the PC at a later time. Measuring of PAR is active only in the PAR-FluorPen FP 110
(see picture below). Also, by pressing the Multi button in this window the Multiple measurements can be started remotely.
Fig. 25 Online control - Protocols.

PSI FluorPen FP 110 Specifications

General

Brand	PSI
Model	FluorPen FP 110
Category	Measuring Instruments
Language	English