Pulseroller ConveyLinx-Ai2 - Page 9

9
Introduction
Publication ERSC-1521 Rev 1.0 – February 2019
All available assemblies can be connected utilizing the Generic Ethernet
Module method. Only a selected few assemblies are available from the
EDS file installation.
Assembly Pair
Available from
EDS File
Installation
Available as
Generic
Ethernet
Module
ZPA Mode Assembly Inputs
ZPA Mode Assembly Outputs


ZPA Mode Assembly Inputs with Reset Protection
ZPA Mode Assembly Outputs with Reset Protection


Reduced Size ZPA Mode Assembly Inputs
Reduced Size ZPA Mode Assembly Outputs

Reduced Size ZPA Mode Assembly Inputs with Reset Protection
Reduced Size ZPA Mode Assembly Outputs with Reset Protection

PLC I/O Mode Assembly Inputs
PLC I/O Mode Assembly Outputs


PLC I/O Mode Assembly Inputs with Reset Protection
PLC I/O Mode Assembly Outputs with Reset Protection


Reduced Size PLC I/O Mode Assembly Inputs
Reduced Size PLC I/O Mode Assembly Outputs

Reduced Size PLC I/O Mode Assembly Inputs with Reset Protection
Reduced Size PLC I/O Mode Assembly Outputs with Reset Protection

ConveyLogix Assembly Inputs
ConveyLogix Assembly Outputs

