Figure 4. Reload button
2.1.6. Factory default setting
The USR-TCP232-30x serial device server comes with the following default setting.
Table 5. Default parameter
2.2. Quick test
USR-TCP232-30x series serial server has a built-in Web server, which provides a convenient way to access
and configure the serial server. Users can use Edge, Firefox or Google browser to access it. This chapter is a quick
introduction to the USR-TCP232-30x series of serial server products. It is recommended that users read this
chapter and follow the instructions once for the system, and you will have a basic understanding of the product.
For specific function details and instructions, please refer to the subsequent chapters.
2.2.1. Download software
Download the software from PUSR’s website:
Config software: 插入设置软件下载链接
Test software: https://www.pusr.com/support/download/usr-tcp232-test-V13.html
After downloading, run the config software. It is strongly recommended for the users to set the Network
Parameters through configuration tool first. Other device-specific configurations can later be carried out via
user-friendly Web-Interface.
To Next Page
Loading...
Need help?
General