Pyronix Matrix 832 - Changing User Codes and Attributes

To Next Page

To Previous Page

Matrix User Guide

RINS915-2 Page: 35

5.12 Changing User Codes and Attributes – LCD Keypad

5.12.1 Changing a User Code

Follow this procedure if you want to change a user’s code only:

Use the 

and

 keys to navigate to “CHANGE CODES”. The following display will be shown:

Press  to select this option.

The following display will be shown:

Use the

 and

 keys to select the required user.

The user number (1-32) will be displayed on the top right hand corner of the display, and the user name will be

displayed on the bottom line.

Note: At this stage you can exit the CHANGE CODE function by pressing the



key.

Press  to select the user you wish to edit.

The following display will be shown:

Enter the new code for this user followed by  if less than 6 digits

The following display will be shown:

Enter the new user code again, followed by  if less than 6 digits, an acceptance tone will be heard and you

will return to the main menu.

Pyronix Matrix 832 - Changing User Codes and Attributes - Lcd Keypad; Changing a User Code