MOBILE SURVEILLANCE QT428 User Manual
81 | Page
Step 7：Click System setting--->Login Setting to enter login interface.
Step 8：Input the DVR’s address, ID and password respectively. Then save.
Notice
: About Access point, there may be different access points in different countries or from service
providers.
Step 9：Enter Live View, it will connect to the server and display pictures.
Notice
: User name and password here are the same with that used on the DVR. The default is admin and
123456.
Step 10：In Live View, users can do snapshot, change channels and control PTZ cameras.
To Next Page
Loading...
