MOBILE SURVEILLANCE QT428 User Manual
84 | Page
Step 7: Click Live, the default Cam1 picture will be displayed. Click to capture picture.
Step 8: On function interface, click Image View to view the captured picture. Click
or to switch to next or
previous picture. Click
to delete the current picture.
iPhone help
Pic1 Pic2 Pic3
Live View
After successfully installing SuperCam software, Click on System Setting (Pic 1), and then input DVR’s IP
address or Domain name, User name and password to log in (Pic 2). If connected successfully, it will go to Live
View of CH1 as default (Pic 3), please choose other desired channels from channel button underneath. Below is
a table of functions:
To Next Page
Loading...
Need help?
General
