To Next Page

To Previous Page

Manual for Advance 10B/Advance 10F

Award BIOS Description

AWARD BIOS Description

Entering Setup

Power on the computer, when the following message briefly appears at the bottom of

the screen during the POST (Power On Self Test), press <Del> key or simultaneously

press the <Ctrl> + <Alt> + <Esc> keys, to enter the AWARD BIOS CMOS Setup Utility.

Press <Del> to enter SETUP

Once you have entered, the Main Menu (Figure 1) appears on the screen. The main menu

allows you to select from eleven setup functions and two exit choices. Use the arrow

keys to select among the items and press the <Enter> key to accept or enter the sub-

menu.

Figure-1 Main Menu

Load Fail-Safe Defaults

The Fail-Safe Defaults are secure and useful for system. It is recommended users load

the Fail -Safe Defaults when the system is in trouble.

Load Optimized Defaults

The Optimized Defaults are common and efficient. It is recommended users load the

optimized defaults first, then modify the needed configuration settings.

Standard CMOS Features Setup

The basic CMOS settings included in “Standard CMOS Features” are Date, Time, Hard

Disk Drive Types, Floppy Disk Drive Types, and VGA etc. Use the arrow keys to highlight

the item, then use the <PgUp> or <PgDn> keys to select the value desired in each item.

Questions and Answers:

Need help?

Do you have a question about the QDI ADVANCE 10F and is the answer not in the manual?

QDI ADVANCE 10F Specifications

General