To Next Page

To Previous Page

Manual for Advance 10B/Advance 10F

SpeedEasy Introduction

SpeedEasy CPU Setup Menu

Select <SpeedEasy CPU SETUP> item from the main menu and enter the sub-menu:

Figure - 1 SpeedEasy CPU Setup Menu

BIOS provides you with a set of basic values for your processor selection instead of the

jumper settings. The processor speed can be manually selected from the “SpeedEasy

CPU SETUP” menu screen.

Warning:

Do not set CPU frequency higher than its working frequency. If you do, we will not be

responsible for any damages caused. Whether or not the system can be overclocked

depends on the processor’s capability. We do not guarantee the overclock system to

be stable.

Users are provided with CPU overclock feature through “Jumper Emulation”. The host bus

speed can be set as 66/75/83/100/103/105/112/115/124/133/140/150MHz. The multiplier

can be chosen from 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8 or 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5,

11, 11.5, 12. However the multiplier setting will not function for bus ratio locked processor,

only bus ratio unlocked processor.

Questions and Answers:

Need help?

Do you have a question about the QDI ADVANCE 10F and is the answer not in the manual?

QDI ADVANCE 10F Specifications

General