QNAP TR-002 User Manual

3. Install a drive on the tray.
a. Remove the right fastening panel from the tray.
b. Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes
on the bottom of the tray.
c. Attach the screws.
QNAP External RAID Enclosure User Guide
Hardware Installation 16

QNAP TR-002 Specifications

General

Hot-swap	Yes
RAID levels	0, 1, JBOD
Storage drive size	2.5/3.5 \
Number of storage drives supported	2
Supported storage drive interfaces	Serial ATA II, Serial ATA III
USB version	3.2 Gen 2 (3.1 Gen 2)
USB connector type	USB Type-C
USB ports quantity	1
Fan diameter	70 mm
Product type	HDD/SSD enclosure
Product color	Black
LED indicators	HDD, SSD, Status, USB
Number of fans	1 fan(s)
Country of origin	Taiwan
Data transfer rate	6 Gbit/s
Supported file systems	FAT32, HFS+, NTFS, exFAT, ext3, ext4
Power source type	DC
AC adapter input voltage	100 - 240 V
AC adapter output voltage	12 V
Mac operating systems supported	Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.2 Jaguar, Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1
Cables included	AC, USB Type-C
Number of keys included	2 pc(s)
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	219 mm
Width	102 mm
Height	168.5 mm
Weight	1370 g