QNAP TR-002 User Manual

LED Status Description
Drive Flashes green • Data is being accessed.
• Data is being copied.
• An external application is monitoring the RAID
enclosure.
Green The drive can be accessed.
Off • The RAID enclosure is in standby mode.
• No drives are detected.
USB Blue The RAID enclosure is connected to the host.
Off • The RAID enclosure is not connected to the host.
• The RAID enclosure is in standby mode.
Audio Alert
Duration Frequency Description
Short beep (0.5 seconds) 1 • The RAID enclosure is starting up.
• The RAID enclosure is ready.
• The RAID settings are modified.
Long beep (2 seconds) 3 times (every 5 minutes) • The system fan is not functioning.
• The system or drives are overheating.
• A RAID group is in degraded mode.
• A RAID group failed.
3 times (non-repeating) • The RAID rebuilding process started.
• The RAID rebuilding process finished.
Standby Mode
The RAID enclosure features standby mode to help reduce noise and power consumption. When the RAID
enclosure enters standby mode, the system fan and installed HDDs stop spinning, and system processes
are paused. Upon waking, the RAID enclosure returns to the previous system state and any paused
processes are resumed.
The RAID enclosure enters standby mode under the following conditions:
• The host enters hibernation or standby mode or is powered off.
The RAID enclosure only enters standby mode if the USB power design of the host supports this
feature.
• The USB cable is disconnected.
Note
The TR-002 will not enter standby mode during RAID rebuilding. If prompted to enter
standby mode during RAID rebuilding, the TR-002 will finish RAID rebuilding before
entering standby mode.
QNAP External RAID Enclosure User Guide
Basic Operations 30

QNAP TR-002 Specifications

General

Hot-swap	Yes
RAID levels	0, 1, JBOD
Storage drive size	2.5/3.5 \
Number of storage drives supported	2
Supported storage drive interfaces	Serial ATA II, Serial ATA III
USB version	3.2 Gen 2 (3.1 Gen 2)
USB connector type	USB Type-C
USB ports quantity	1
Fan diameter	70 mm
Product type	HDD/SSD enclosure
Product color	Black
LED indicators	HDD, SSD, Status, USB
Number of fans	1 fan(s)
Country of origin	Taiwan
Data transfer rate	6 Gbit/s
Supported file systems	FAT32, HFS+, NTFS, exFAT, ext3, ext4
Power source type	DC
AC adapter input voltage	100 - 240 V
AC adapter output voltage	12 V
Mac operating systems supported	Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.2 Jaguar, Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1
Cables included	AC, USB Type-C
Number of keys included	2 pc(s)
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	219 mm
Width	102 mm
Height	168.5 mm
Weight	1370 g