QNAP TS-h1283XU-RP User Manual

Connecting SAS Expansion Units
To connect the TS-h1283XU-RP to SAS expansion units, a storage expansion card must be installed in the
NAS. For required accessories details, see Expansion Unit Installation.
1. Install a storage expansion card on the PCIe slot.
For details, see Replacing Expansion Cards.
2. Connect the expansion units to the NAS using the following topology.
3. Power on the expansion units.
4. Verify that the expansion units are recognized by the NAS.
a. Log on to QuTS hero as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > System .
TS-h1283XU-RP User Guide
Installation and Configuration 27

QNAP TS-h1283XU-RP Specifications

General

Brand	QNAP
Model	TS-h1283XU-RP
Category	Storage
Language	English