QNAP TVS-672XT - Page 49

10. Specify the following information.
• NAS name: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to
z), numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
• Username: Specify an administrator username that contains 1 to 32 characters. The name
supports letters (A to Z, a to z), numbers (0 to 9), and hyphens (-), multi-byte Chinese,
Japanese, Korean, and Russian characters.
The username cannot contain the following special characters: grave accent (`), asterisk (*),
equal sign (=), plus sign (+), square brackets ([ ]), slash (\), vertical bar (|), semicolon (;),
colon (:), apostrophe ('), quotation mark ("), comma (,), less than sign (< ), greater than sign
(>), backslash (/), question mark (?), percent sign (%), or "admin".
• Password: Specify an administrator password with 1 to 64 characters. The password
supports all ASCII characters.
• Conrm Password: Enter the new administrator password again.
11. Click Next.
The Set the date and time screen appears.
12. Specify the time zone, date, and time using any of the following methods:
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
Methods User Actions
Synchronize with
computer or device time
Select Same as the computer/device time
The NAS time will be the same as your computer or device used
to congure the time.
Enter manually a. Select Input Manually.
b. Specify the date and time.
The NAS date and time will be the same as the congured
time.
Synchronize with an
Internet time server
automatically
Click Synchronize with an Internet time server automat‐
ically.
The NAS time will be the same as the NTP server.
13. Click Next.
The Congure the network settings screen appears.
TVS-x72XT User Guide
Installation and Conguration 48