QOLSYS IQ4 Hub User Manual

Z-WAVE DEVICES
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 101 197
VIEW/EDIT ASSOCIATIONS
1. Select the Z-Wave device you would
like to associate with another by
touching “View”
Manually change Z-Wave associations for specific devices.
2. Select “Edit”
3. “Check” the boxes next to each
device that you would like to
associate with. Then select “Save”
Note: The IQ4 Hub supports
Lifeline in Group 1 to send out
Device Reset Locally when it has
been associated to another Z-
Wave Plus™ device. This is
triggered when “REMOVE ALL
DEVICES” is used

QOLSYS IQ4 Hub Specifications

General

Brand	QOLSYS
Model	IQ4 Hub
Category	Control Panel
Language	English