When enabled it allows the ability to apply simple automated actions to lights and switches
directly from the panel
Activate or deactivate the Z-Wave radio. Please use this procedure only when the controller
(panel) is missing or inoperable
Sets automatically based on install region and Z-Wave hardware installed in the panel or
manually choose between United States, European Union, Australia/New Zealand, Hong
Kong, Malaysia, India, Israel, Russia, China, Japan or Korea.
When Advanced Z-Wave Settings is enabled the following new icons will appear on the Z-
Wave Devices page:
-
Replace Failed Node: Allows a node that has failed to be replaced with a new device using
the same node ID
-
Add/Remove Controller: This icon acts like an “Add/Remove” button when pairing the IQ
Panel into another network
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 103 197
To Next Page
Loading...
Need help?
General
