INSTALLER/DEALER SETTINGS
EU Event Swinger Shutdown Count
Determines the number of times a particular event will record to “EU Events” log before
shutdown. The count (3-10) will reset after and arm or disarm event. NOTE: This setting is
greyed out and not selectable unless EN Grade 2 is Enabled.
Set the Panel's language toggle to your favorite 2 languages. Choose from English
(United States), Français (Canada), Español (Estados Unidos), Italiano (Italia), Nederlands
(Nederland), Norsk bokmål (Norge), Svenska (Sverige), Íslenska (Ísland), Deutsch
(Deutschland), Magyar, (Magyarország), Dansk (Danmark), Românā (România), Portuguesa
(Portugal), Polskie (Polska), Suomalainen (Suomi), Français (France), Español (España),
Hebrew, Türk (Türkiye).
Manually Enable/Disable the LED Status Light on the panel.
NOTE: This setting will automatically be set to Disabled when EN Grade 2 is Enabled.
When Enabled, LED Status Light on the Panel will flash orange if there is a power failure.
This is a global setting for all codes used on the panel and changes the input from 4 digits
to 6 digits. When enabled, a “00” will be appended to all existing 4 digit codes
Commercial Sensor and Device
Names
Enabling this features changes the sensor name vocabulary from residential naming to
commercial naming.
When Enabled, Auxiliary Pendants learned into Group 6 behave like a traditional PERS
pendant. The system generates a signal to Alarm.com but does not generate a loud local
alarm that needs to be disarmed between button presses. NOTE: This feature cannot be enabled if
Partitions are enabled.
To Next Page
Loading...
Need help?
General
