Set the threshold at which the Panel Ambient Noise Detector determines there is enough
noise to generate an alert. Choose from values between 75 and 95 dB. NOTE: This setting is
greyed out and not selectable unless Panel Ambient Noise Detector is Enabled.
Determines the length of time for which the panel must detect noise above the threshold
level in order to generate a noise notification.
Determines whether the panel indicates locally on the screen that noise event has been
detected.
Zigbee Network Type
NOTE: Not evaluated for UK or CE/EN Grade 2
Home
Automation and
Security
Choose which type of Zigbee network you’d like to use. Options are Home Automation
and Security or Smart Energy. NOTE: This setting only appears when a Zigbee daughter card is installed in
the Panel. When paired to UL Listed Zigbee devices, Zigbee can be used for UL/ULC Listed Residential Fire and
Burglary applications.
When Enabled, PowerG devices that support light sensor capabilities report light status to
the Panel. Data is stored for future use.
Temperature Reporting (PowerG)
When Enabled, PowerG devices that support temperature measurement, report
temperature information to the Panel. Data is stored for future use.
Determines whether the System Health Check feature shows up on the Manage My
System primary user interface (enabled) or not (disabled).
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 36 197
INSTALLER/DEALER SETTINGS