quadient DS-77iQ - System Specifications; General System Specifications

Loading Envelopes
on page 72
Adjust envelope sep-
aration.
Envelope separation
not correctly set.
Envelopes are double
fed.
Loading Envelopes
on page 72
Check and replace if
needed.
Envelopes not placed
properly in the hop-
per.
Loading Envelopes
on page 72
Check side guides
and adjust if needed.
Side guides of the
envelope hopper are
set too wide.
Envelope stops
skewed.
Refill hopper.Hopper almost empty.Envelopes are fed ir-
regularly.
Loading Envelopes
on page 72
Adjust envelope sep-
aration.
Separation set too
narrow.
Loading Envelopes
on page 72
Check side guides
and adjust if needed.
Side guides set too
narrow.
Loading Envelopes
on page 72
Reposition the envel-
ope support.
Envelope support not
positioned correctly.
Envelope Specifica-
tions on page 143
Check specifications
and change envel-
opes if needed.
Envelope not within
specifications.
Flap is wrinkled and
sometimes not
opened.
Envelope Specifica-
tions on page 143
Store envelopes ac-
cording to specifica-
tions.
Flap sticks.
Envelope Specifica-
tions on page 143
Envelopes stored or
manufactured improp-
erly.
Flap curled.
Loading Envelopes
on page 72
Adjust envelope sep-
aration.
Separation set too
narrow.
Adjust the envelope
insert fingers position
on page 45
Check fingers posi-
tion, adjust if needed.
Fingers adjusted too
deep into the envel-
ope.
Fingers are placed on
top of the envelope.
Verify the Insert Posi-
tion on page 43
Check envelope stop
position, adjust if
needed.
Envelope stops too
early.
10
English
137
| Page 137 | Jul-11-2022 07:45 | Fault Finding