quadient DS-77iQ - Document and Enclosure Specifications; Envelope Specifications

Editing a job on
page 55
Check fold settings,
adjust if needed.
Inserted document
too big.
Envelope not always
ejected from sealer.
Verify the Insert Posi-
tion on page 43
Check adjustment of
envelope stop posi-
tion and fingers.
Document not inser-
ted deep enough.
Maintenance Sched-
ule on page 124
Clean sealing area.Sealing area dirty.
Loading documents
standard feeder tray
on page 64
Loading documents
maxiFeeder on page
68
Refill feeder tray.Feeder tray empty.No document fed.
Adjusting the Separa-
tion of Special Feed-
ers on page 48
Adjusting the Separa-
tion of the maxiFeed-
er on page 67
Adjust the separation.Separation set too
wide / too tight.
Adjusting the side
guides standard
feeder trays on page
62
Adjusting the side
guides maxiFeeder
on page 65
Adjust the side
guides.
Side guides set too
narrow.
Adjusting the side
guides standard
feeder trays on page
62
Adjusting the side
guides maxiFeeder
on page 65
Adjust side guides.Side guides set too
wide.
Skewed documents
fed.
Adjusting the Separa-
tion of Special Feed-
ers on page 48
Adjust the separation.Separation set too
wide.
Double documents
fed.
10
English
139
| Page 139 | Jul-11-2022 07:45 | Fault Finding