8. Shift the envelope support C in the correct position, according to the printed scale and
matching the envelope size (height).
9. Pull down lever D and insert one envelope up to the stoppers. The position of the
envelope is flap down and trailing (bottom side of the envelope pointing to the system).
10. Return lever D.
By returning the lever the separation is set to the envelope thickness between the
rollers.
When the envelope separation lever B is pulled down, the envelope
separation is cleared. If lever B is accidentally pulled down the
separation must be reset with one envelope.
74
| Page 74 | Jul-11-2022 07:45 | Loading the System
5
English
To Next Page
Loading...
