Figure 14. Foot Platform Adjustment Figure 15. Power Elevating Seat
Toggle Switch
Identifi cation Key
1. Foot Platform Bracket
2. Hardware
3. Screw
1
2
3
NOTE: The power elevating seat option is equipped with a system that
reduces the speed of the power chair to one quarter when the seat is
elevated. Always check to be sure this system is operating properly
before using your power chair.
Positioning Belt
Your power chair may be equipped with a positioning belt that can be adjusted
for operator comfort. See fi gure 16. The positioning belt is designed to
support the operator so that he/she does not slide down or forward in the
seat. The positioning belt is not designed for use as a restraining device.
WARNING! The positioning belt is not designed for use as a seat belt
in a motor vehicle. Nor is your power chair suitable for use as a seat
in any vehicle. Anyone traveling in a vehicle should be properly belted
into seats approved by the vehicle manufacturer.
To Next Page
Loading...
Need help?
General
