GL100 User manual
External Battery Kit
(Optional accessory)
It is a set of accessories include an
external battery, a power control
unit and a pelican waterproof
casing. It will greatly improve the
working time of GL100 and also let
the GL100 can be used for some
special application like container
tracking.
Please refer to “GL100 External
Battery Kit User Manual.pdf” for
detail.
Please notice the external battery kit
only works on a special hardware
version of GL100 which called
GL100NB.
GL100 Data Cable
(Optional accessory)
It the USB data cable which can be
used for firmware upgrading and
configuration.
GL100 Holder Without Magnet
(Optional accessory)
It is used to hold the GL100, mount
to somewhere with the screw.
GL100 Holder With Magnet
(Optional accessory)
It is used to hold the GL100,
attached to metal with the magnet
on it.
3.2. Battery Charging
z Please connect AC-DC power adapter with GL100.
z Insert the AC-DC power adapter into the power socket.
z During charging, the Red LED 2 is blinking slowly. When the battery is full charged, the
Green LED 2 will be solid.
z You can also charge the battery by USB cable which connects GL100 with the PC.
z Charging time is about 5 hours.
Note: Before the first time using GL100, please full charge the battery.
TRACGL100UM002 - 9 -
To Next Page
Loading...
Need help?
General
